AlloyO Special Metal: ALLOY625 0.8~4.0mm Coils And Welding Consumables In Stock

 

Alloy625 alloy, OWE to high nickel chromium and molybdenum content, high corrosion resistance, So, long-term use in many oil and gas and high temperature corrosion environments. Especially in the petrochemical industry, Alloy 625 often replaces S31254 and N08825 alloys in the high working conditions of some halogen ions, which has good corrosion resistance.
Some bellows expansion joints, petrochemical and coal chemical cylinders, under severe conditions, the application of corrosion-resistant Alloy625 has become normal.
AlloyO special metal has stocked Alloy625 material, the thickness from 0.8~4.0mm, and the matching welding consumables are sufficient.
At the same time, AlloyO special metal undertakes the processing and production of elbows, flanges and non-standard fittings.

Alloy625 coil, Alloy625 thickness, Alloy625 welding consumables

What AlloyO can do?
We can Supply Special corrosion resistant alloy imported and original from Germany, US and Japan in stock as below:
--Super Austenitic Stainless Steel
--Duplex Stainless Steel
--Nickel-Based Corrosion Resistant Alloy
--Titanium and Alloy
--RE and its Oxide
Corrosion resistant special metal stock, All in AlloyO.
Details are available at specialmetalstock.com 

评论

发表评论

此博客中的热门博文

AlloyO Special Metal: Monel400 alloy 0.6mm thin sheets have been delivered

图片
  AlloyO Special Metal: Monel400 alloy 0.6mm thin sheets have been delivered  AlloyO Special Metal has successfully delivered to a research institute user for Monel400 nickel-copper alloy.  The research institute has not used N04400 Monel Alloy. Before used, there has communication about the Material Properties such as elongation and thermal conductivity many times, and sample detection is requires. After three months of comprehensive evaluation, the user is satisfied with the Monel400 test results.  So, the user has purchased 12 sheets of Monel400 with a thickness of 0.6mm. Of course, due to the strict requirements on the surface of the material, the user needs Monel400 to be completely scratch-free on the sheets surface, and AlloyO Special Metal has a surface film protection during processing.  ---------------------------------------------------  AlloyO can Supply Special corrosion resistant alloy imported and original from Germany, US and Japan in stoc...
阅读全文

AlloyO Special Metal: Commercial pure GR1 titanium bars of 120 pieces are ready

图片
  AlloyO Special Metal: Commercial pure GR1 titanium bars of 120 pieces are ready  In 2019, some old users gave greater support to AlloyO Special Metal. On the titanium work pieces, AlloyO Special Metal has received more orders than usual. In particular, some forgings and bars of GR5, GR2 and GR1 titanium, although the titanium material has a large cost increase in 2019, the supply of AlloyO does not decrease and the overall has been significantly improved.  Recently, more than 120 pieces of pure titanium GR1 bars undertaken by AlloyO Special Metal have been prepared. The whole batch of bars has an outer diameter of 25mm and a length of 2900mm. It was brightly annealed and delivered in boxes.  Noted: In addition to round bars, square bars, forgings and machined parts of GR5, GR2 and GR1 materials, AlloyO Special Metal has great advantages. If you have an order, you are appreciated to communicate.  ---------------------------------------------------  Alloy...
阅读全文

AlloyO Special Metal: N10276 Alloy C276 forged round bars have been cutting in fixed sizes

图片
  AlloyO Special Metal: N10276 Alloy C276 forged round bars have been cutting in fixed sizes  A batch of Hastelloy C276 N10276 round bars with outer diameters of 75mm and 101.6mm has been delivered recently.  The user required the Hastelloy forged structure in an annealed condition. Happily, this batch of raw materials imported materials was the forging process when ordered.  The user required a fixed length, ranging from 1700 to 2400 mm in length. Therefore, AlloyO Special Metal was delivered directly after being cut by a band saw.  According to the feedback from the sales department, the user would have the next CNC machining.  ---------------------------------------------------  AlloyO can Supply Special corrosion resistant alloy imported and original from Germany, US and Japan in stock as below: Super Austenitic Stainless Steel; Duplex Stainless Steel; Nickel-Based Corrosion Resistant Alloy; Titanium and Alloy; RE and its Oxide.  Corrosion r...
阅读全文