AlloyO Special Metal:: HASTELLOY C-22 Alloy 3.0mm Specification In Stock

 

AlloyO Special Metal:: HASTELLOY C-22 alloy 3.0mm specification in stock

UNS N06022 HASTELLOY C-22 alloy is one of the well-known and well-proven nickel-chromium-molybdenum materials, the chief attributes of which are resistance to both oxidizing and non-oxidizing chemicals, and protection from pitting, crevice attack, and stress corrosion cracking. Its high chromium content provides much higher resistance to oxidizing media than the family standard, C-276 alloy, and imparts exceptional resistance to chloride-induced pitting, an insidious and unpredictable form of attack, to which the stainless steels are prone.
Like other nickel alloys, HASTELLOY C-22 alloy is very ductile, exhibits excellent weld ability, and is easily fabricated into industrial components.
AlloyO has a few of N06022 alloy and welding wire stocks for long-term users in special fields, with a maximum thickness of 12.7mm. The matching wire specification is ERNCRMO-10. The thickness of this batch of incoming materials is 3.0mm.
Typical chemical process industry (CPI) applications include reactors, heat exchangers, and columns.

HASTELLOY C-22 alloy, UNS N06022 welding, C22 alloy stocks

What AlloyO can do?
We can Supply Special corrosion resistant alloy imported and original from Germany, US and Japan in stock as below:
--Super Austenitic Stainless Steel
--Duplex Stainless Steel
--Nickel-Based Corrosion Resistant Alloy
--Titanium and Alloy
--RE and its Oxide
Corrosion resistant special metal stock, All in AlloyO.
Details are available at specialmetalstock.com 

评论

发表评论

此博客中的热门博文

AlloyO Special Metal: Nickel-based Alloy C-276 Of 0.6mm Coil Was Flattened Into Pieces

图片
  AlloyO Special Metal: Nickel-based alloy C-276 of 0.6mm Coil was flattened into pieces  The selection of this user was a bit tortuous. The first was to find the N08020 alloy, and required short-time delivery.  The delivery of large and wide sheets of N08020 alloy in the short term was also a global problem. Thats impossible!  AlloyO Special Metal asked about the working conditions and material requirements. According to the user's requirements, N08825 alloy should be suitable. More stable point would be used in nickel-based alloy C-276.  After listening to the professional analysis of AlloyO Special Metal, after browsing the corrosion chart provided by AlloyO Special Metal, the user technology department and the operation department communicated, and finally adopted the recommendation of AlloyO Special Metal, signed a technical agreement and business purchase agreement with AlloyO Special Metal.  In many cases, the design department and the technical department do not understan
阅读全文

AlloyO Special Metal: Monel400 alloy 0.6mm thin sheets have been delivered

图片
  AlloyO Special Metal: Monel400 alloy 0.6mm thin sheets have been delivered  AlloyO Special Metal has successfully delivered to a research institute user for Monel400 nickel-copper alloy.  The research institute has not used N04400 Monel Alloy. Before used, there has communication about the Material Properties such as elongation and thermal conductivity many times, and sample detection is requires. After three months of comprehensive evaluation, the user is satisfied with the Monel400 test results.  So, the user has purchased 12 sheets of Monel400 with a thickness of 0.6mm. Of course, due to the strict requirements on the surface of the material, the user needs Monel400 to be completely scratch-free on the sheets surface, and AlloyO Special Metal has a surface film protection during processing.  ---------------------------------------------------  AlloyO can Supply Special corrosion resistant alloy imported and original from Germany, US and Japan in stock as below: Super Austenitic
阅读全文

AlloyO Special Metal: ALLOY600 N06600 Seamless Tubes Have Been Delivered For Chemical Industry

图片
  AlloyO Special Metal: Alloy600 N06600 seamless tubes have been delivered for Chemical industry  According to the request of a chemical user, AlloyO Special Metal has supplied with a batch of N06600 alloy seamless tubes.  This order time was long: the user had always consulted the NS331 material seamless tubes, which are matching the domestic 600 alloy material. The quantity was small, the production could not be organized, and the user did not accept the welded pipe.  Fortunately, the user has a clear requirement for the inner diameter of the N06600 alloy tube, and there was no high requirement for the outer diameter, so the probability of organizing production with other users was large.  After more than a month of waiting, AlloyO Special Metal finally completed the order of N06600 alloy seamless tubes together with other users' orders.  ---------------------------------------------------  AlloyO can Supply Special corrosion resistant alloy imported and original from Germany,
阅读全文