AlloyO Special Metal: S32205 2205 Duplex Steel 3.0mm Coil Has Been Flattened

 

AlloyO Special Metal: S32205 2205 duplex steel 3.0mm coil has been flattened

Category: duplex stainless steel
Grade: S32205 2205
Specifications: 3.0mm x 1219 x Coil
Original: Japan
Description: coil into sheets
User: Water treatment industry

What AlloyO can do?
We can Supply Special corrosion resistant alloy imported and original from Germany, US and Japan in stock as below:
--Super Austenitic Stainless Steel
--Duplex Stainless Steel
--Nickel-Based Corrosion Resistant Alloy
--Titanium and Alloy
--RE and its Oxide
Corrosion resistant special metal stock, All in AlloyO.
Details are available at specialmetalstock.com 

评论

发表评论

此博客中的热门博文

AlloyO Special Metal: Nickel-based Alloy C-276 Of 0.6mm Coil Was Flattened Into Pieces

图片
  AlloyO Special Metal: Nickel-based alloy C-276 of 0.6mm Coil was flattened into pieces  The selection of this user was a bit tortuous. The first was to find the N08020 alloy, and required short-time delivery.  The delivery of large and wide sheets of N08020 alloy in the short term was also a global problem. Thats impossible!  AlloyO Special Metal asked about the working conditions and material requirements. According to the user's requirements, N08825 alloy should be suitable. More stable point would be used in nickel-based alloy C-276.  After listening to the professional analysis of AlloyO Special Metal, after browsing the corrosion chart provided by AlloyO Special Metal, the user technology department and the operation department communicated, and finally adopted the recommendation of AlloyO Special Metal, signed a technical agreement and business purchase agreement with AlloyO Special Metal.  In many cases, the design department and the technical de...
阅读全文

AlloyO Special Metal: Commercial pure GR1 titanium bars of 120 pieces are ready

图片
  AlloyO Special Metal: Commercial pure GR1 titanium bars of 120 pieces are ready  In 2019, some old users gave greater support to AlloyO Special Metal. On the titanium work pieces, AlloyO Special Metal has received more orders than usual. In particular, some forgings and bars of GR5, GR2 and GR1 titanium, although the titanium material has a large cost increase in 2019, the supply of AlloyO does not decrease and the overall has been significantly improved.  Recently, more than 120 pieces of pure titanium GR1 bars undertaken by AlloyO Special Metal have been prepared. The whole batch of bars has an outer diameter of 25mm and a length of 2900mm. It was brightly annealed and delivered in boxes.  Noted: In addition to round bars, square bars, forgings and machined parts of GR5, GR2 and GR1 materials, AlloyO Special Metal has great advantages. If you have an order, you are appreciated to communicate.  ---------------------------------------------------  Alloy...
阅读全文

AlloyO Special Metal: Monel400 alloy 0.6mm thin sheets have been delivered

图片
  AlloyO Special Metal: Monel400 alloy 0.6mm thin sheets have been delivered  AlloyO Special Metal has successfully delivered to a research institute user for Monel400 nickel-copper alloy.  The research institute has not used N04400 Monel Alloy. Before used, there has communication about the Material Properties such as elongation and thermal conductivity many times, and sample detection is requires. After three months of comprehensive evaluation, the user is satisfied with the Monel400 test results.  So, the user has purchased 12 sheets of Monel400 with a thickness of 0.6mm. Of course, due to the strict requirements on the surface of the material, the user needs Monel400 to be completely scratch-free on the sheets surface, and AlloyO Special Metal has a surface film protection during processing.  ---------------------------------------------------  AlloyO can Supply Special corrosion resistant alloy imported and original from Germany, US and Japan in stoc...
阅读全文